Revv Generator 100P MKIII 120-watt Tube Head
Revv Generator 100P MKIII 120-watt Tube Head
The Revv Amplification Generator 100P quickly became a favorite of modern rock & metal musicians worldwide for its mix-ready high gain clarity. So when it came for MK3, we knew we had to build on that legacy.
What is MK3? MK3 is the world’s first line of stereo-direct-output reactive load & impulse response tube amps. Not only does the Generator 100P MK3 bring you 3 channels of all-tube finely-tuned boutique Canadian tone based on feedback from world-class touring artists, session guitarists, & audio engineers – it also features Two notes Audio Engineering Torpedo-embedded DynIR Virtual Cabinet technology for going direct to FOH, studio monitors, or headphones. No cabinet required.
But it doesn’t stop there! A state-of-the-art noisegate & lush reverb are built right in! All accompanied by a host of switching & voicing updates to make getting the sound in your head faster than ever.
Generator 100P MK3 features 3 of Revv Amplification’s channels, each an original circuit! Its high gain Purple Channel is famous for its razor-sharp metal note separation, & now in MK3 it receives additional low end & even more saturation with no loss in tightness. Another MK3 upgrade is a fully independent EQ for each channel. Take full control of all 3 channels! The clean Blue Channel is chimey with tons of headroom, & now includes a “Wide” switch to give you a wide-range frequency boost for more push & sustain. The crunch Green Channel feature 3 all-new drive modes to take this dynamic channel from edge of breakup, to clear overdrive, to classic stack tones.
COA in box
Footswitch
Total Power:120W (10W setting)
Preamp Tubes:4 x 12AX7
Power Tubes:4 x 6L6GC
Reverb:Yes, Digital
Effects:Bright, Overdrive
EQ:3-band EQ
Inputs:1 x 1/4"
Outputs:2 x XLR, 1 x 1/4" (16 ohm), 4 x 1/4" (4/8 ohm)
Effects Loop:Yes
MIDI I/O:In/Thru
Other I/O:4-pin Lighting
USB:1 x Type B
Footswitch I/O:1 x 5-pin
Construction Material:Baltic Birch
Power Source:Standard IEC AC cable
Height:10.5"
Width:26.5"
Depth:10"
Weight:46 lbs.
Original: $2,799.00
-70%$2,799.00
$839.70Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Revv Generator 100P MKIII 120-watt Tube Head
The Revv Amplification Generator 100P quickly became a favorite of modern rock & metal musicians worldwide for its mix-ready high gain clarity. So when it came for MK3, we knew we had to build on that legacy.
What is MK3? MK3 is the world’s first line of stereo-direct-output reactive load & impulse response tube amps. Not only does the Generator 100P MK3 bring you 3 channels of all-tube finely-tuned boutique Canadian tone based on feedback from world-class touring artists, session guitarists, & audio engineers – it also features Two notes Audio Engineering Torpedo-embedded DynIR Virtual Cabinet technology for going direct to FOH, studio monitors, or headphones. No cabinet required.
But it doesn’t stop there! A state-of-the-art noisegate & lush reverb are built right in! All accompanied by a host of switching & voicing updates to make getting the sound in your head faster than ever.
Generator 100P MK3 features 3 of Revv Amplification’s channels, each an original circuit! Its high gain Purple Channel is famous for its razor-sharp metal note separation, & now in MK3 it receives additional low end & even more saturation with no loss in tightness. Another MK3 upgrade is a fully independent EQ for each channel. Take full control of all 3 channels! The clean Blue Channel is chimey with tons of headroom, & now includes a “Wide” switch to give you a wide-range frequency boost for more push & sustain. The crunch Green Channel feature 3 all-new drive modes to take this dynamic channel from edge of breakup, to clear overdrive, to classic stack tones.
COA in box
Footswitch
Total Power:120W (10W setting)
Preamp Tubes:4 x 12AX7
Power Tubes:4 x 6L6GC
Reverb:Yes, Digital
Effects:Bright, Overdrive
EQ:3-band EQ
Inputs:1 x 1/4"
Outputs:2 x XLR, 1 x 1/4" (16 ohm), 4 x 1/4" (4/8 ohm)
Effects Loop:Yes
MIDI I/O:In/Thru
Other I/O:4-pin Lighting
USB:1 x Type B
Footswitch I/O:1 x 5-pin
Construction Material:Baltic Birch
Power Source:Standard IEC AC cable
Height:10.5"
Width:26.5"
Depth:10"
Weight:46 lbs.
